BLOWER WHEEL, 703023

The CW Blower Wheel for direct drive blowers are dynamically balanced and forward curved, incorporating the Preslok center disc construction for positive blade retention. The wheel provides higher RPM capability and industry proven reliability. Wheels are made of galvanized, cold-rolled steel. Rotation is by viewing hub (bore) end.

• Disc Setback (Outside Edge of Disc to End of Wheel Opposite Hub Dim. C): 4-11/32 inches
• Disc Shape (Hub side): Convex
• Hub Length Dim. B: 1-1/8 inches
• Keyway: None
• Number of Blades: 48
• Number of Set Screws: 1
• Nominal Hub Bore Shaft Size Dim. E: 1/2 inch
• Nominal Size: 10 x 10 inches
• Outside Edge of Disc to Outside End of Hub Dim. A: 2 inches
• Overall Diameter Dim. D: 10-5/8 inches
• Overall Width Dim. W: 10-11/16 inches
• Rotation Direction (Facing Hub): Clockwise (CW)