CRANKCASE HEATER, 44-101884-09

The Belly Band crankcase heater helps protect the compressor from refrigerant migration by optimizing the temperature of the crankcase oil. Acting as a heat sink, the crankcase can then absorb and transmit heat directly to the oil. Heat loss to ambient air is greatly reduced along with major cause of refrigerant migration.

• For use with scroll compressors
• Easy to install and adjustable by screw
• Uses high temperature silicone rubber element
• For optimum heat transfer, mount in lowest position on compressor housing
• Completely moisture proof
• Corrosion resistant
• UL recognized

• Application: Scroll
• Ground Terminal: #10 Ring Eyelet
• Ground Wire Length (in.): 48
• Ground Wire Type (AWG): 18
• Lead Wire Lengths (in.): 48
• Lead Wire Size (AWG): 18
• Lead Wire Terminations: 1/4 in. Quick Connects
• Maximum Diameter (in.): 6-3/4
• Minimum Diameter (in.): 5-1/2
• Temperature Limit Switch Included: Open 74 F, Close 64 F
• Voltage (V): 480
  
• Watts (W): 40